Signs of a failing hose bib
- Dripping from the spout even when closed
- Water in the basement near the wall after using the hose
- No water from the tap in spring because it froze
- A handle that spins freely
Repair or upgrade
Standard hose bibs need their inside shut-off closed every fall. Frost-free hose bibs have a long stem so the valve sits inside the warm wall. We repair washers and stems where possible and replace damaged or old bibs with frost-free models with built-in backflow protection.
- Close the interior shut-off and drain the line.
- Remove the old bib.
- Install a new frost-free bib sloped to drain.
- Seal the exterior and test.
Winter routine
Disconnect hoses before the first freeze. A hose left attached keeps water in a frost-free bib and can split it. Close the inside valve on older bibs and open the outside tap to drain.
Tools, access and testing
| Tools we bring | Copper cutter, ProPress jaws, PEX crimper, moisture meter |
|---|---|
| What we open | Drywall at the leak, ceiling panels, the main valve |
| What we test | Static pressure on the line, joints under load |
Where in Brampton we do this
We take outdoor faucet repair calls right across the city, including Sandringham-Wellington, Bram East, Mount Pleasant, Credit Valley and the streets around them.
Questions we get
Why did my frost-free bib still burst?
Usually because a hose was left attached, trapping water inside the stem.
